How to change battery in chrysler 200 key fob

Question

Chrysler Key Fob Battery Replacement – How to Replace, Costs, Size, What to Do When the Battery is Dead and More.

Chrysler key fob battery replacement – Inside look

Most Chrysler models made after 2010 use a key fob, or a push to start remote key technology. This type of key has advanced security features, as well as built-in keyless entry and more.

Prefer to watch a video how to replace the battery? Click here to see a list of Chrysler key fobs and choose yours.

Key fob batteries

This type of key fob is battery operated. Once in a while, there are some issues with the key fob because of this battery. We will go over some important information and a few tips about what to do when the battery is dead, how to change the battery, cost, and some technical information.

2021 Chrysler key fob battery

Most of Chrysler model’s key fobs use the same battery which is CR2032. This battery is very common and you can find it in most hardware stores, AutoZone, locksmith shop, and online. You can order it here.

Price of Chrysler key fob battery: Usually less than $6

Chrysler battery operated transponder key – Inside look

We also recommend getting a cover for the key fob to keep it in better condition. Chrysler key fob cover cost about $10-$15 and definitely worth the price. You can order it online here

Before we get into some specific information, here is some useful information you must know:

First, if you are locked out of your car because the key fob battery is dead you can use the emergency key provided with the key to unlock the car door.

Chrysler key fob emergency key used to unlock the doors in case the battery dies

The emergency key should work on all doors and trunk cylinders

All Chrysler key fobs have an emergency key – make sure yours is cut

How to start Chrysler with a dead key fob?

In case you need to start your Chrysler with a dead key fob simply push the “start” button with your key fob

Starting your Chrysler with a dead key fob

You can start your Chrysler by pushing the “Start” button with your key fob. The car’s computer recognizes the chip inside the key fob and authorizes the process.

This way, you will be able to start your vehicle EVEN if the key fob battery is dead.

Back to top

Technical information for CR-2032 battery: (Click for more information from Panasonic)

Diameter (mm): 20

Height (mm): 3.2

Voltage (V): 3

Programming information:

No coding is necessary after replacing the battery for Chrysler key fobs

After replacing the key fob battery, there is no need to do any special programming. The key fob should work as usual.

However, if you just bought a new key fob, you will need to have it programmed to start the car. This can be done by an automotive locksmith or a dealership. Click here for more information about key fob programming.

Back to top