Featured UTV Parts and Accessories Show
Want to take your Can Am Defender out on the roads? Make sure you have the appropriate necessities that will make your machine ready for the streets. With Defender street legal and D.O.T. approval stuff from SideBySideStuff.com, you�ll be well on your way. We have a wide selection of Can Am parts that you need for a safer ride on the streets. *Estimated shipping time is up to five weeks from time of purchase. Can-Am Defender Self-Canceling Turn Signal System with HornPlug and Play Easy Install $389.00
DescriptionSelf-Canceling Turn Signal Kit for Can-Am DefenderXTC Power Products Leads the way in UTV wiring. You will never leave your turn signal on with our new Self-Canceling Turn Signal System for the Can-Am Defender. Similar to its predecessor, the TSS (Turn Signal System), the ATS is a Plug and Play easy install Can-am Defender turn signal kit. The ATS consists of a small solid-state control box that performs its functions–differing from the prior generation’s larger control box. Like the TSS, the ATS Self-Canceling Turn Signal Kit is a modular design with vehicle specific SKUs. How the ATS WorksAll ATS part numbers include a marine grade rocker switch with laser-cut directional arrows that flash green when activated. When you press the turn signal rocker switch, the ATS will activate the turn blinker for a short duration and then self-cancel. This feature is useful for simple lane changes. On the other hand, an extended rocker switch press will yield a longer blinker duration suitable for making left- and right-hand turns. You can manually cancel the turn signal by pushing the actuator a second time. Also IncludedAlso included in our Self-Canceling Can-Am Defender turn signal kit is a ‘Hazard/Horn’ rocker switch. Pressing the top ‘Hazard’ side of the actuator will turn on the hazard lights, pressing it again deactivates them. Furthermore, pressing the lower portion of the custom rocker switch will activate the included street legal FIAMM horn. Each ATS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the ATS. As a result, the opposing brake light still functions normally while the activated turn signal brake light flashes. Hands-on with the ATS Can-Am Defender Turn Signal KitUnlike our competitors, all ATS kits include an auxiliary power out for a license plate light or whip lights. Moreover the aux power is good for powering our 6″ LED Lit License Plate Frame. Above all, each system comes with a vehicle specific power connection. Without a doubt, it’s easy to install with no wires to cut and no crimping. Because of its size, the ATS is versatile to mount as well. Everything needed to integrate with your vehicles OEM brake light harness included. Unplug the rear light harness, plug-in ours, and enjoy. XTC Power Products, made in America and Wired For Fun®!
Additional information
Installation HelpTSS-DEF-IB This Kit Fits:
Part # 8102A-8002 *PLEASE NOTE THAT THE ACCENT LIGHTS 8002 THAT COMES WITH THIS KIT WILL NOT BE AVAILABLE UNTIL THE MIDDLE OF NOVEMBER, THEY ARE CURRENTLY ON BACK ORDER. WE APOLOGIZE FOR ANY INCONVIENCE THIS MAY HAVE CAUSED.* This Upgraded Kit Fits:
*Kit comes with Signature Accent/Signal Lights, also available to buy separate. Part #8002 Kit utilizes the stock headlight and taillight assemblies for a clean factory appearance and includes:
*FOR DEFENDER MODELS WITH FULL DOORS THE SWITCH FIT IS TIGHT. IF INTERESTED IN AN ALTERNATE SWITCH MOUNT, ASK RYCO MOTORSPORTS FOR THE DEFENDER ALTERNATE SWITCH MOUNT TO USE WITH THE
STEERING WHEEL SHROUD EITHER REMOVED OR TRIMMED. **DEFENDERS WITH HVAC REQUIRE HARNESS EXTENSIONS ON THE FRONT TURN SIGNAL HARNESS AND THE RYCO POWER, GROUND & HORN HARNESS. CONTACT RYCO MOTORSPORTS FOR THE REQUIRED EXTENSIONS AT NO CHARGE. *Converting off-road vehicles is not legal in all states. Check local regulations for specific requirements in your area. Can I make a CanWhile the Can-Am Defender isn't street legal in its stock form, making it street legal is surprisingly simple. With a Can-Am Defender street legal kit, you can enjoy the best of both worlds with your UTV.
How fast does a CanThe Defender's class-leading HD10 engine makes 82 hp and 69 pound-feet of torque, which means this UTV makes good speed. With the right combination of setup and road surface, Can-Am says the Defender can hit 62 mph.
Does the CanThe Can-Am Defender in its stock form comes with a very basic skid plate. This stock skid plate is better than nothing, but you shouldn't rely on it to do more than block small pebbles. If you really want to avoid costly damage, upgrading your Can-Am Defender with high-quality aftermarket skid plates are the way to go.
|