How to open stella rosa wine bottle without a corkscrew

Step away from the saber, my friend.

Updated on August 24, 2022

Table of Contents Show

Step away from the saber, my friend.
What You Need
Follow These Steps
References
About This Article
Reader Success Stories
Did this article help you?
How do you open a bottle without a bottle of wine without a corkscrew?
How do you open a screw top wine bottle that won't open?

Nothing says "celebrate!" quite like a bottle of sparkling wine or Champagne (i.e., a sparkling wine made from grapes grown in the Champagne region of France and produced using the Méthode Champenoise). There's just something about those little bubbles that makes any gathering instantly more festive. But opening a bottle of Champagne, prosecco, or cava can feel a bit like shooting a rocket indoors. To pop and pour like a pro, watch this video.

Before you begin, chill. No seriously, keep in mind that a warm or room temperature bottle will be far more volatile and likely to explode the cork than one that is properly chilled. The proper serving temperature for sparkling wines should be colder than white wines, around 45 F.

What You Need

A chilled bottle of sparkling wine
A dish towel

Follow These Steps

Remove foil. The foil on most bottles has a little tab that you can pull to make this process easier. If not, use a wine opener knife to begin this process. Once removed, discard the foil.
Loosen the wire cage. Flip down the small wire "key" that's pressed up against the neck of the bottle at the bottom of the wire cage that encloses the cork. Turn the key to loosen the cage. (Fun fact: All bottles of bubbly require exactly six half-twists to fully remove the cage). When finished, discard the cage.
Drape a dish towel over the bottle. This is used just in case built-up pressure causes the cork to pop on its own, but the towel will be at the ready to catch any wine spills, too.
Twist your bottom hand until the cork eases out. Keeping the bottle pointed in a safe direction—away from you and other people—grasp the base of the bottle with your dominant hand and the cork with the other. Do not try to twist the cork. Instead, hold the cork firmly while turning the bottle slowly toward you, with your hand holding the base. As you turn the bottle from the base, you should feel the cork start to loosen and then ease into your hand. (Slight hiss = success.) Continue until you hear the soft pop of the cork leaving the bottle. Pro Tip: To avoid foamy overflow, pour only about an inch of wine into each glass at first, wait a few seconds for bubbles to subside, and then continue filling to just below the rim.

You may not believe this but you don't need any fancy gadgets to open a bottle of wine like a boss. All it takes is an old-school corkscrew and a little know how.

To help you out with this endeavor the talented folks at VinePair (an excellent resource for lovers of vino) have put together a short video that illustrates how easy it is to open a bottle of wine with a simple corkscrew.

Also known as a waiter's corkscrew, this wine-opening utensil has three components: a small serrated knife for cutting the foil, the worm (the twisty part that goes into the cork), and two notched levels for pulling out the cork. Here's how to use it to open a bottle of wine:

Once you feel comfortable enough to open a bottle of wine with a corkscrew you may want to kick things up a notch. If that's the case try impressing your friends by opening a bottle of champagne with a knife, a technique called sabering. Check it out:

Finally, if you ever find yourself with a bottle of wine but no corkscrew don't panic. Here's a nifty visual guide that will help you open a bottle of wine without a corkscrew and plenty of swag:

Download Article

Imagine a beautiful day, a perfect picnic, a special someone, a loaf of bread, some cheese, a bottle of wine and... wait, no corkscrew? No problem! There are many simple ways to get that bottle of vino open and the wine flowing! However, to make sure you're not in this pickle again, it's always good to have a corkscrew on hand. You can purchase a new one here.

1
Find an object with blunt ends. It should be narrower than the cork and something that will not stab, shatter, burst, chip, or break the cork or bottle. A cheap white ballpoint pen or basic marker (including a highlighter or dry erase marker), in each case with the cap on, will work well. You could also use a long rod, a cylindrical container of chapstick, or a slim knife sharpener. Carabiners work well, too.[1]
2
Place the bottle on the floor or a steady surface. You can put in your lap to keep it in place. You could simply rest it on a table as well.[2]
- You can also place the object against a wall or other vertical surface and press horizontally. Push on the bottle's wide base to force the cork in easily. Hold the neck area and the other end of your object to prevent slipping. Make sure the surface is strong enough so that it will not dimple, or protected, like a wall padded with some junk mail.
Advertisement
3
Set your object against the cork. The cork is usually already recessed slightly into the bottle's neck. If the cork is flush with the end of the bottle, push your object against the cork to force it in a little. This will allow your object to stay in place without slipping off the side of the bottle.
4

Push the cork down. Point the bottle away from people, just in case wine sprays out. While gripping the bottle with one hand and your object with the other hand, push firmly on the cork until it falls into the bottle. Be ready for the wine to splash a bit when the cork hits it.[3]
- This method works well but you will likely end up with small pieces of cork in your wine. You can strain the wine through a coffee filter before serving it to remove any cork pieces.[4]
- The surrounding area (and the opener's clothes!) should be stain-resistant as a little wine may spill; don't try this with red wine and a nice outfit or over a carpet. Have some napkins handy; you may wish to wrap one around the neck as you push.

1
Find a pocket knife or a paring knife. The blade has to fit easily into the neck of the bottle. You can also try using a serrated knife so that it grips the cork better.[5]
- Exercise caution when using a knife. Make sure not to cut yourself.
2
Insert the blade into the cork. Carefully work the knife back and forth into the cork, using very little downward pressure. It should go all the way through the cork.[6]
3
Twist back and forth to slowly remove the cork. With the blade buried in the cork, twist the knife with a slight pull, and slowly work it out. Be careful not to break off pieces of the cork into your wine.[7]
4
Wedge the knife in between the bottle and the cork. Use the knife to pry the cork out from the side. Carefully insert the knife between the edge of the cork and the bottle. Apply slow, even pressure on the cork by pulling the knife towards you so that its blade moves inward, like a lever.
- If applying pressure from the side, it works best to grip the bottleneck with your free hand slightly below the knife.

1
Remove the wine bottle's protective cover. Make sure no plastic or foil is covering the cork. It should be just the cork and the bottle. To remove the cover, simply slide it off by pulling it upwards. If it doesn't slide off, pull on the tab if it has one, which will remove the top portion of it. Alternately, cut it off with a knife by gently tracing a knife around the edge of it.[8]
2
Place the bottle of wine in the opening of your shoe. It can be any kind of flat shoe (not high heels or flip flops), as long as its opening is large enough to accommodate a bottle of wine. The bottle should go in bottom first so that the cork is facing you. To keep the bottle in the shoe, you will hold the bottle with one hand and the shoe with your other hand.[9]
3
Hit the sole of your shoe holding the wine bottle gently against a wall. Continuing to hold both the shoe and the bottle, hit the bottom of your shoe against a wall several times. The bottle should be horizontal and you only need to make contact on the wall with the portion of your shoe directly under your bottle. Your shoe will protect the bottle from breaking, but don't hit it too hard. A firm hit several times should begin to move the cork out due to the pressure in the bottle.[10]
- If you are on a picnic and there isn't a wall nearby, you could hit your shoe against a pole or a tree. Just make sure not to miss it or you will likely drop your bottle!
- If you don't have a shoe that fits a wine bottle, you could wrap the bottle in a towel or hold a book behind the bottle while hitting it. The shoe's purpose is simply to protect the bottle from breaking.
4
Remove the cork. Once the cork has moved out of the bottle by about an inch, you can simply pull out the cork with your fingers. Your bottle of wine is now ready to enjoy.[11]

1
Find a screw and pliers. The wider the distance between threads on the screw, the better. Make sure that any objects which come into contact with the cork are clean as dirty objects increase the likelihood of tainting your wine.
2
Twist the screw into the cork. Turn the screw into the center of the cork until there is about ½" (1.2 cm) sticking out. You should be able to do this using only your fingers, but if you need help, you could use a screwdriver.[12]
- Work carefully to ensure that the cork does not break apart into smaller pieces.
3
Pull on the screw with pliers. Use the pliers to pull the screw out – the cork should come with it. The claw (nail-pulling side) of a hammer also works well in place of pliers, as does a fork. You simply need some object that can grip the screw better than your fingers.[13]
4
Remove the screw with a corncob holder. Simply replace the pliers with the corncob holder, making a T shape. The screw should be vertical and the corncob holder should be horizontal. Place the corncob holder where the prongs are hugging the screw. Place your index and middle fingers on the prongs and handle respectively, and pull up.
- Make sure the corncob holder is thinner than the flat end of a small to medium threaded screw.
5
Use a bicycle hook instead of a screw. Find a bicycle hook (the kind used to hang bikes from rafters). Screw it into the cork. Using the vinyl-coated hook as a handle, pull the cork out, away from your body. This way, you don't need pliers or another object to remove it.

1
Straighten the hook of a wire hanger. Get a cheap wire coat hanger and bend the hook part out straight.
2
Make a mini hook at the bottom of the hanger. Use pliers to make a little hook by bending the last half inch (10 mm) back until it makes an angle of about 30 degrees (a bit like a fishhook).[14]
3
Wedge the wire in between the cork and the wine bottle. The wire should be straight against the edge of the bottle (the hook shouldn't face in yet). Push the wire down beside the cork until the little hook is below the cork. You will need to push it down at least 2” to accomplish this.[15]
4
Rotate the wire 90 degrees. This will allow the hook to grab the bottom of the cork so that you can easily pull it out. Simply twist the hanger so that the little hook moves towards the center of the bottle.[16]
5
Remove the cork. Pull on the hanger slowly, wobbling it back and forth a bit to ease out the cork. You might want to wear gloves, as the wire can hurt your fingers. The hook should enter into the cork while pulling up so that the cork moves with the hanger.
6
Use the hanger as a corkscrew. An alternate method with a coat hanger is to use the hanger in place of a corkscrew. After straightening the hook, simply insert it into the center of the cork. Twist the hanger while pulling on it gently. This will gradually remove the cork.[17]

1
Get two paperclips and a pen. Partially straighten the paperclips, leaving the U-shapes intact. Pull the outer portion of the paperclip into a straight line without straightening the innermost U shape.
2
Insert one of the paperclips in the side of the bottle. Work one of the small U's into the bottle between the glass and the cork until the U is below the cork and the straight portion remains out of the bottle. Rotate the wire 90 degrees so that the U will be beneath the cork when you pull up.[18]
- Repeat on the opposite side of the cork with the second paperclip.
3
Join the ends of the paperclips together. Twist the ends together a few times. They should be securely joined so that they stay together when pulling out the cork.
4
Remove the cork. Insert a suitable utensil, such as a spoon handle, pen barrel, or pencil, under the twisted wires. Slide your fingers under the utensil, with the wires between your middle and ring fingers, and slowly pull out the cork.[19]

1
Find 3 short finishing nails and a hammer. Ideally, you will want the nails to reach just to the bottom of the cork.
2
Gently hammer the nails into the cork. Hammer them straight down and form a line with the nails. Keep the nails close to each other. Don't hammer too hard or you could break the cork into pieces.[20]
3
Place the claw of the hammer around the nails. It should grip them tightly to allow for removal.
4
Pry the nail-embedded cork out of the bottle. Simply pull on the hammer and gradually move the cork towards you. You can gently rock it back and forth to help with removal. You can also use the hammer and nails to hold the cork in place and twist the bottle away from you to separate the cork from the bottle.[21]
- If at first the cork does not come out, hammer nails in again in a line perpendicular to the original line and try again.

1
Get a pair of scissors. It is best to use smaller craft scissors or scissors for children (not safety scissors).
2
Open the scissors all the way. Be sure not to touch the sharp side of the blades. Hold the handles of the scissors and open them fully.
3
Insert the thinner blade into the middle of the cork. Carefully apply a slight amount of pressure and push the scissor blade halfway into the cork. Be careful not to push the cork into the bottle or break the cork.[22]
4
Twist the scissor handles while pulling up. Hold the bottle tightly with one hand while twisting the handles of the scissors. Alternately, hold the handles of the scissors still and twist the bottle instead. The cork will come out on the scissor blade if you have the blade wedged deep enough or the cork will come out far enough to be pulled out by hand.[23]

Add New Question

Question
Should the wine be cold or warm?

The wine's temperature is not important for opening the bottle.
Question
Who should I serve wines to?

Anyone over 21 years old in the USA or over 18 in many other countries, neighbors, friends, your coworkers! While wine is good for formal parties, you should not bring only wine to a casual party. For casual parties or get together-s, consider bringing both beer and wine. Don't give wine to people in faiths that do not allow them to consume wine, or at least don't be offended when they reject your offering.
Question
Can I store wine after opening if I have half a bottle left?

You can keep it in the fridge (or on the counter, for red wine) by using a wine stopper, but you really should finish the bottle within a couple of days if you want it to still taste good.

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Point the bottle away from you when pushing the cork in to avoid getting sprayed.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
If you don't have pliers, wrap sturdy twine on the screw and pull it.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
All of these methods take some time and effort. If you have easy access to a store, you may be better off simply buying a corkscrew.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

Show More Tips

Be extra-careful with sharp implements, and do not use them when drunk.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
Using your teeth to open a bottle of wine can cause damage to your teeth.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!
You will break the wine bottle if you are too forceful in any of these methods.
As a small thank you, we’d like to offer you a $30 gift card (valid at GoNift.com). Use it to try out great new products and services nationwide without paying full price—wine, food delivery, clothing and more. Enjoy!

References

About This Article

Article SummaryX

To open a bottle without a corkscrew, try using your shoe. First, remove any foil around the cork. Then, place the bottom of the bottle inside of a flat-sole shoe and hold the bottom of the shoe against a wall so the bottle is parallel to the floor. Holding the wine bottle in place, hit the sole of the shoe against the wall to push the cork out. Keep hitting the wall until the cork comes out enough that you can grab it and pull it all the way out of the bottle. You can also use a key to open a wine bottle. Start by inserting the tip of the key into the cork at a 45-degree angle as deep as you can. Then, rotate the key around in circles while pulling up on it. Continue rotating and pulling until the cork lifts out of the bottle. Another option is to use a hammer and a screw. Use a screwdriver to insert a screw about halfway into the cork. Then, grip the screw with the back of a hammer and pull until the cork pops out. Keep reading for more strategies, including how to open a wine bottle with a screw, scissors, or a hammer!

Did this summary help you?

Thanks to all authors for creating a page that has been read 6,864,352 times.

Reader Success Stories

"First tried the screw method. Didn't work, it just messed up the cork. Pushed a knife into the cork and wiggled it...." more

Did this article help you?

How do you open a bottle without a bottle of wine without a corkscrew?

Wrap the wine bottle in a towel ensuring the sides and bottom of the bottle are completely encased in the towel. Holding the wine bottle and towel in one hand, bang the bottom of the bottle of wine against a wall, hard, consistently, until the cork starts to slide up and out.

How do you open a screw top wine bottle that won't open?

My first recommendation is what I call the collar grab. Place one hand at the base of the bottle. Then grip the collar (the portion of the capsule below the actual screw cap) with the other hand and twist each hand in opposite directions until you hear that joyous crack. Et voilà!