How do i reset the icemaker on my samsung refrigerator

If you have an ice maker that is Samsung, you may have run into an issue with it not making or making enough ice. This could be due to several reasons, but the fix is relatively easy. You will need to reset Samsung ice maker by turning off the electrical breaker that supplies power to it, or unplugging it from the wall. When this reset button is pressed, everything will turn off and then make a sound when it restarts.

Samsung is industry-leading for making high-quality refrigerators, but their ice makers can experience issues. A simple ice maker reset can get your ice maker back up and running in no time.

How To Reset Samsung Ice Maker – Step by Step Instruction

Ice makers are one of the most popular appliances in any kitchen. They’re a luxury that we all enjoy. But sometimes, they can break down and stop working. When this happens, you need to know how to reset your ice maker.

If your ice maker isn’t making ice like it used to, don’t worry! You can troubleshoot the issue on your own. There are several things you can check to see if you’re making regular ice again. If you’re still having issues, you may want to follow our troubleshooting steps given on the website before attempting a reset. You should only do a reset as a last resort, after all of the other troubleshooting steps have been completed.

NOTE: We recommend you only press the test button on the ice maker once or twice a day. The device will not be damaged if the button is pressed more than once per day. However, more frequent presses may result in water overflowing or ice being jammed and damaging the device.

STEP 1: Remove the Ice Bucket

With an ice bucket in place in your refrigerator, you have a fresh batch of ice whenever you need it. But even though the ice bucket is designed to be easy to remove, it can still be a little confusing. Place your hand underneath the bucket, palm up, and gently pull it out by grasping at the bottom of the bucket at the opening. Then, lift it slightly, and slowly draw it out of the machine.

An iced-over compartment may result in a suboptimal experience, and we want to avoid that. If there is extra ice in the compartment after removing the ice bucket, use a towel or soft cloth to help remove excess ice before placing the lid back on the compartment. The door can be left open to help it defrost.

STEP 2: Look for the Reset Button

Below the ice bucket is a small panel marked with a Test button. This is how you test the ice maker, which is useful if you want to make sure that it’s working properly or if you want to check whether there are any issues with the ice maker’s operation.

Pressing and holding the test button for three seconds or until you hear a chime (about 3-5 seconds) confirms the ice maker is functioning properly. After the chime, test the ice maker by selecting any button. The machine will respond with an audible beep and produce a full cube of ice. If the chime stops, but you see movement from the ice maker, it means that it was reset.

If the ice maker isn’t making any sound and there isn’t any activity on the display, turn off the fridge or unplug it from the wall. Wait two minutes, and plug it back in. These steps may reset the ice maker’s connection between the water line and your fridge, and they may be all that’s needed to get things going again.

STEP 3: Reattach the Samsung Ice Maker Ice Bucket

Now place the Samsung ice maker ice bucket of ice into the Helix. It will click into place. If it does not, turn the Helix 90 degrees, and then try again. Once the ice bucket is installed correctly, you should be able to see the light (B) on the front of your Samsung ice maker (if not, you may need to press and hold the switch once more).

If you are having a problem with your refrigerator ice maker, wait until the ice has ejected from the reservoir before attempting to reset it. Otherwise, you may get water on the floor that could damage your flooring.