2004 dodge ram 1500 ignition lock cylinder replacement

Q: How do you program a Dodge ignition switch?

Insert your key into the ignition and turn it to the RUN” position. For four seconds, press and hold the UNLOCK” and PANIC” buttons simultaneously. Then, release at the same time. Press and release both the LOCK” and UNLOCK” buttons, then press the UNLOCK” button until your Dodge responds with a lock cycle.

PO Box, APO/FPO, Africa, Alaska/Hawaii, Asia, Barbados, Bermuda, Canada, Central America and Caribbean, Europe, French Guiana, French Polynesia, Greenland, Guadeloupe, Libya, Martinique, Mexico, Middle East, New Caledonia, Oceania, Reunion, Russian Federation, Saint Pierre and Miquelon, South America, Southeast Asia, US Protectorates, Ukraine, Venezuela

Table of Contents Show

Product Description
Can you change an ignition lock cylinder without a key?
How do you start a Dodge Ram without a key?
How do you program a Dodge ignition switch?
How do you replace a key lock cylinder?

Product Description

Ignition lock cylinder worn out, making turning your key difficult or impossible? This direct replacement properly restores operation while maintaining the same level of security as the original equipment design. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chrysler Aspen: 2007] - [Dodge Dakota: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010] - [Dodge Durango: 2001, 2002, 2003, 2004, 2005, 2006, 2007] - [Dodge Ram 1500 Van: 2001, 2002, 2003] - [Dodge Ram 1500: 2002, 2003, 2004, 2005, 2006, 2007, 2008] - [Dodge Ram 2500 Van: 2001, 2002, 2003] - [Dodge Ram 2500: 2003, 2004, 2005, 2006, 2007, 2008] - [Dodge Ram 3500 Van: 2001, 2002, 2003] - [Dodge Ram 3500: 2003, 2004, 2005, 2006, 2007, 2008] - [Mitsubishi Raider: 2006, 2007, 2008, 2009]

The ignition lock cylinder on your Dodge Ram is the tumbler that you put the key into to start your truck or activate the accessory circuit on the ignition switch. When you turn the ignition lock cylinder in your truck, the position of the ignition switch moves to make connection to the appropriate circuit to start and run your engine. Since you use the ignition lock cylinder every time you insert the key, it can wear out or lock up over time and need to be replaced. If you are having problems starting your Ram, or if your truck won't start at all, or if the key is difficult to remove or to insert, the ignition lock cylinder might be failing. O'Reilly Auto Parts carries ignition lock cylinders for your Ram, as well as ignition switches and the tools to do the job right so you can make a full repair.

Can you change an ignition lock cylinder without a key?

Take the Ignition lock cylinder and a straightened paperclip and insert the clip into the slot and then turn it anti-clockwise. This locks the cylinder and stops the ignition from starting.

How do you start a Dodge Ram without a key?

How do you start a RAM truck with a dead key fob? This is the same process as when you need to start it without your key fob. Get the regular key out of the back of the fob, press it against the ignition, press the brake and you're good to go! You can also replace your key fob battery and use the fob.

How do you program a Dodge ignition switch?

Insert your key into the ignition and turn it to the “RUN” position. For four seconds, press and hold the “UNLOCK” and “PANIC” buttons simultaneously. Then, release at the same time. Press and release both the “LOCK” and “UNLOCK” buttons, then press the “UNLOCK” button until your Dodge responds with a lock cycle.

How do you replace a key lock cylinder?

Pull on the key to pull the lock cylinder completely out of its casing. If the ignition is sticking, wiggle it back and forth until you free it from its hole. Insert the new lock cylinder and turn it counterclockwise until it clicks. Push your new lock cylinder into the hole and twist it towards you.

dodge ram ignition lock cylinder replacement